Aluminium facade cladding
Composite panels with a fire-resistant core. Choose the surface, colour and gloss, and watch the building change.
A fire-resistant core, the surface you want.
The outer face of the building is clad with aluminium composite sheets that have a fire-resistant core. Behind the panels, in front of the wall, stone wool and a vapour control layer provide thermal insulation. Panels are produced in standard sizes as well as made to measure for each project.
- CORE
- Fire-resistant, non-combustible
- SURFACE
- Painted, with a high-durability protective film
- PATTERN
- Solid · Metallic · Sparkle · Natural stone · Wood
- GLOSS
- Standard 30%, 30–80% to suit the architecture
- SIZE
- Standard production sizes and made to measure
- INSULATION
- Stone wool and vapour control layer
- PANEL THICKNESS
- [To be confirmed]
From survey to handover
STEPS TO BE CONFIRMED WITH THE COMPANY- 01Survey and measurementThe facade is measured on site and the panel layout is drawn up.
- 02Support frameAn aluminium subframe is anchored to the wall.
- 03InsulationStone wool and a vapour control layer are laid in front of the wall.
- 04Panel installationPanels cut to size are hung on the subframe.
- 05Joints and handoverJoints are sealed, the protective film is removed and the facade is handed over.
Projects with this system
Frequently asked
Are composite panels fire-resistant?
Yes. The panels we install are made with a fire-resistant, non-combustible core.
Which colours and patterns are available?
There are solid, metallic, sparkle, natural stone and wood-pattern options. We go through the colour catalogue and samples with you during the site survey.
Can I choose the gloss level?
Standard gloss is 30%. Depending on the architectural brief, panels can be produced at anywhere from 30% to 80%.
How is thermal insulation provided?
Stone wool and a vapour control layer are applied behind the panels, in front of the wall. This layer between panel and wall keeps the heat inside.
Can composite cladding be added to an existing building?
Yes. An aluminium substructure is fixed to the existing facade and the panels are hung on it. We check the facade and take measurements during the survey.
How do you maintain a composite panel facade?
The surface can be washed with water and a neutral cleaner. Avoid abrasive products and hard brushes.
How long does facade cladding take?
It depends on the facade area, the number of floors and scaffolding. After the survey we give you the schedule in writing with the quotation.